Big Daddy's
Pinball Electronics For Sale
SWITCHES and RELAYS

Please Click Here if you do not see a menu frame on the left

PartDescriptionPart NumberCost
Momentary push button switch used
on Bally and Williams boards.
Made by Grayhill part #39-251 Red

$3.50 Each $15.00 5-Pack

SW-PUSH $3.00 Each

$13.00 5-Pack


PartDescriptionPart NumberCost
Generic pinball/arcade leaf switch.
Unknown maker, no markings.
Has a support arm, one arm longer than the other.
Believed to be for arcade push buttons.
SPECIAL PURCHASE/Out of stock.

$2.00 Each $9.00 5-Pack

SW-LEAF-1 $2.00 Each

$9.00 5-Pack


PartDescriptionPart NumberCost
Generic pinball/arcade leaf switch.
Unknown maker, no markings.
Has support arm, arms the same length, shorter than above.
Believed to be for arcade push buttons.
SPECIAL PURCHASE/Out of stock.

$2.00 Each $9.00 5-Pack

SW-LEAF-2 $2.00 Each

$9.00 5-Pack


PartDescriptionPart NumberCost
Generic pinball/arcade leaf switch.
Unknown maker, no markings.
No support arm, arms the same length, side mount screw hole.
Believed to be for arcade push buttons.
SPECIAL PURCHASE/Stock limited to 88.

$2.00 Each $9.00 5-Pack

SW-LEAF-3 $2.00 Each

$9.00 5-Pack


PartDescriptionPart NumberCost
Cherry E51-00B Low Torque Switch
Rated 6A@250VAC, Std Parallel Terminal
Suitable replacement for coin door switches in Bally, Stern,
Williams and other games including video games.
Please note that tabs are bent inward NOT down as shown.
Wire form not included!
Out of stock, looking for more but having no luck

$3.00 Each $12.00 5-Pack

SW-CHERRY $3.00 Each

$12.00 5-Pack


PartDescriptionPart NumberCost
Generic microswitch
Low force, rated at 10Amps.
Actual switch is red & black
Model "V3-2101-D8"
$2.00 Each $9.00 5-Pack
SW-MICRO-1 $2.00 Each

$9.00 5-Pack


PartDescriptionPart NumberCost
Generic microswitch
Low force, rated at 10Amps.
Actual switch is red & black
Model "V3L-104-D9"
These switches are often found in slot
machines for the door lockouts, but also
found in video games and pinball machines
$2.00 Each $9.00 5-Pack
SW-MICRO-3 $2.00 Each

$9.00 5-Pack


PartDescriptionPart NumberCost
Generic microswitch with arm
Not marked with a rating or maker.
Model "V3L-297-TV" also marked TV-3
SPECIAL PURCHASE/Stock limited to 40

$2.00 Each $9.00 5-Pack
SW-MICRO-2 $2.00 Each

$9.00 5-Pack


PartDescriptionPart NumberCost
Toggle Switch, SPDT
Here's a nice mini-toggle switch, with mounting hardware
Rated at 2A/250VAC or 5A/125VAC
Mounts in a 1/4" hole

$1.00 Each $4.50 5-Pack

SW-SPDT $1.00 Each

$4.50 5-Pack


PartDescriptionPart NumberCost
Toggle Power Switch, SPST
Nice single pole/single throw power switch by Leviton, with mounting hardware. Can be used on any game that uses just two wires and a ground. Older pinball machines, video games, slots, etc. Mounts in about a 1/2" hole.
Rated at 3A/250VAC or 6A/125VAC

$4.00 Each $15.00 5-Pack $25.00 10-Pack

SW-POWER $4.00 Each

$15.00 5-Pack

$25.00 10-Pack


PartDescriptionPart NumberCost
DPDT, 48VDC, Relay Assembly
Perfect replacement for the Flipper Enable relay on Bally Solenoid/Regulator modules
Includes PCB mounted socket and retaining wire

BALLYRELAY $10.00 Each

PartDescriptionPart NumberCost
DPDT, 48VDC, Relay Assembly, USED
Here's a used tested & working relay pulled from a
Bally Solenoid/Regulator boards, solder type.

RELAY-BU $6.00 Each

PartDescriptionPart NumberCost
DPDT, 24VDC, General purpose Relay Assembly
Replacement for Williams System 7
board mounted GI relay.

Tyco / Electronics K10P-11D55-24

RELAY-24V $10.00 Each

PartDescriptionPart NumberCost
DPDT, 48VDC, Relay Assembly
Guardian Electric A410-362625-14 1310-Series Relay

New old stock, obtained from an arcade/slot guy
but unsure of what they are used in.

RELAY-Guard $10.00 Each

PartDescriptionPart NumberCost
Dip Switch, Bank of 8
Here's a perfect replacement for the 8-switch DIP Switches
found on Bally and Gottlieb MPU boards, and many other misc. boards.
Current stock is red

DIP-8 Switch $0.90 Each
All items, descriptions, prices, and availability are subject to change without notice

 


[Home]


Big Daddy title, background art work, and Bally logo are copyright by Williams Electronics Co.
Gottlieb logos are copyright by D. Gottlieb & Company
All other content is copyright by Big Daddy Enterprises 2011 and may not be borrowed, copied,
downloaded, or reproduced in any way whatsoever without prior written consent from Big Daddy Enterprises